Техника для внесения удобрений

The AT4103 DNMS has a Tebbe spreader superstructure with a wide bin (internal width 2.56 metres). The wear-resistant bin and wear parts are made from Hardox steel. The metering valve height can be adjusted hydraulically. The compost is transported by the Rübig bottom conveyor belt to the two horizontal beaters and two metering discs with a diameter of 1.20 metres. The speed of the separately driven beaters and metering discs can be regulated from 300 to 800 rpm.

The speeds of the beaters and the metering discs can optionally be regulated independently by means of a direct hydraulic drive. The metering quantity can be controlled from 2 tonne/hectare and a spreading width up to a maximum 18 metres.

The spreader superstructure is equipped by default with a weighing system. The weighing system has four weighing units, ensuring continual feedback of the current dose based on the weighing system. The operator can manually correct the dose per hectare during spreading.

https://pmcharvesters.com/wp-content/uploads/2017/10/AT-FAMILY_LR_English_v17.01-v2.pdf